Back-up lamp bulb replacement (Rear combination lamp Type A)
1
Open the tailgate.
2
Remove the service cover.
3
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
4
Remove the bulb from bulb-socket by pulling it out.
5
Insert a new bulb by inserting it into the bulb-socket.
6
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into
the assembly and turn the socket clockwise.
7
Install the service cover by putting it into the service hole.