Rear turn signal lamp (Bulb type) bulb replacement (Rear combination lamp Type A)
1
Open the tailgate.
2
Remove the service cover.
3
Loosen the light assembly retaining screws with a cross-tip screwdriver.
4
Remove the rear combination lamp assembly from the body of the vehicle.
5
Disconnect the rear combination lamp connector.
6
Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots
on the assembly.
7
Remove the bulb from the socket by pressing it in and rotating it counter clockwise until the tabs on the bulb align with
the slots in the socket. Pull the bulb out of the socket.
8
Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
9
Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into
the assembly and turn the socket clockwise.
10
Connect the rear combination lamp connector.
11
Install the rear combination lamp assembly to the body of the vehicle.
12
Install the service cover.