1. Press and hold Driving Assist () button at the desired speed.

   

   The speed limit indicator () light will illuminate on the cluster.

2. Push the + switch up or - switch down, and release it at the desired speed. Push the + switch up or - switch down and hold it. The speed will increase or decrease to the nearest multiple of ten (multiple of five in mph) at first, and then increase or decrease by 10 km/h (5 mph).

   

3. The set speed limit (1) will be displayed on the cluster. If you would like to drive over the preset speed limit, depress the accelerator pedal fully.

   The set speed limit will blink and chime will sound until you return the vehicle speed within the speed limit.

   

Press the () switch to temporarily pause the set speed limit. The set speed limit will turn off or become gray color but the Speed Limit indicator () will stay on.

To resume Manual Speed Limit Assist after the function was paused, operate the +, -, () switch.

If you push the + switch up or - switch down, vehicle speed will be set to the current speed on the cluster.

If you press the () switch, vehicle speed will resume to the preset speed.

Press the Driving Assist () button to turn Manual Speed Limit Assist off. The Speed Limit indicator () will go off.

Always press the Driving Assist () button to turn Manual Speed Limit Assist off when not in use.